|
Szczegóły Produktu:
Zapłata:
|
| Name: | Nichia chip RGB display outdoor p6.67mm full color led board module | Led lamp: | SMD3535 |
|---|---|---|---|
| led chip: | Epistar/Nichia | Drive IC: | MBI5124 |
| Brightness: | >7000cd/sqm | ||
| High Light: | led display board,digital led display board |
||
Nichia Chip Rgb Led Screen Modules Outdoor / P6.67mm Full Color Led Board Module
Specifications
| LED Module | |||
| Dimensions (w x h) | 320mmx160mm | Resolution (w x h) | 48 x 24 |
| Pixel pitch | 6.67mm | Pixel Density | 22,500/m2 |
| LED Chip | Epistar | Pixel Configuration | SMD3535 |
| Standard Panel | |||
| Dimensions(w x h x d)(mm) | 960x 960 x120 | Module Quantity | 18 |
| Physical Resolution (w x h)(dots) | 144 x 144 | Physical Pixels (dots) | 20,736/cabinet |
| Weight/Panel (kgs) | 52 | Material | Steel |
| Average Power/sqm (watts) | 240 | Max Power/sqm(watts) | 800 |
| Parameter | Value | ||
| Brightness | 7000 cd/m2 | ||
| Viewing Angle | Horizontal 140 deg. Vertical 120 deg. | ||
| Minimum Viewing Distance | >6 | ||
| Brightness Control | 256 levels | ||
| Gray Scale | 16 bit | ||
| Refresh Rate | >1920 Hz | ||
| Driving Mode | 1/6 Scan | ||
| Input Power Frequency | 50 or 60 Hertz | ||
| Input Voltage | 96-242 Volt | ||
| Blind Spot Rate | <1/10,000 | ||
| Lifetime at 50% Brightness | 100,000 hours | ||
| IP Rating | IP65 | ||
| Operating Temperature | -40 ~ +80 OC | ||
| Operating Humidity | 10% ~ 90% | ||
| Control Distance | CAT5 cable:<100 m; Single mode fiber:<10 km | ||
| Signal Input Format | AV, S-Video, VGA, DVI, YPbPr, HDMI, SDI | ||
| Operating System | Windows (2000/XP/Vista/7) | ||
Famous Brands Raw Material Selection
1)LED: well-known international brand,with wide viewing angle ,little attenuation ,good heat dissipation, and vivid colors.
2) Driving IC: famous brands such as, Taiwan MBI, Japanese Toshiba, avoidable the defective
phenomena, such as dark bright, virtual light and so on.
3) Power supply: industrial-strength brand.The power maximum power resere of 20% the space , the range of voltage fluctuation is less 5%, high stability.
4) Connector: Aerial grade brands ensure the stable transmission of power and signal.
5) PCB Board: adopt 4-layer design.
6) Easy installation:100 pieces of cabinets' installation can be finished in one hour by one person.
The replacement of any cabinet can be done within 50 seconds.
Osoba kontaktowa: Penny Melton
Tel: +86-18676748824
| Adres fabryczne:Jiada Industrial Area, Tangtou Rd, Shiyan Town, Okręg Bao'an, miasto Shenzhen, prowincja Guangdong, Chiny. | |
| Biuro sprzedaży:Jiada Industrial Area, Tangtou Rd, Shiyan Town, Okręg Bao'an, miasto Shenzhen, prowincja Guangdong, Chiny. | |
| +86--18680320324 | |
| anheer@meltonled.com | |
